Bugtraq: [security bulletin] HPESBGN03740 rev.1 – HPE Network Automation, Multiple Remote Vulnerabilities

—–BEGIN PGP SIGNED MESSAGE—–

Hash: SHA256

Note: the current version of the following document is available here:

https://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-hpesbgn

03740en_us

SUPPORT COMMUNICATION – SECURITY BULLETIN

Document ID: hpesbgn03740en_us

Version: 1

HPESBGN03740 rev.1 – HPE Network Automation, Multiple Remote Vulnerabilities

NOTICE: The information in this Security Bulletin should be acted upon as

soon as possible.

Release Date: 2017-05-04

Last Updated: 2017-05-04

Potential Security Impact: Local: Authentication Bypass; Remote: Code

Execution, Elevated Privileges, SQL Injection

Source: Hewlett Packard Enterprise, Product Security Response Team

VULNERABILITY SUMMARY

Potential security vulnerabilities have been identified in HPE Network

Automation. The vulnerabilities could be remotely exploited to allow SQL

injection, code execution, information disclosure, authentication bypass,

elevated privilege execution, and invalid session management.

References:

– CVE-2017-5810 – SQL injection

– CVE-2017-5811 – remote code execution

– CVE-2017-5812 – remote information disclosure

– CVE-2017-5813 – remote unauthenticated access

– CVE-2017-5814 – remote authentication bypass, elevated privilege

execution

SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.

– HP Network Automation Software 9.1x, 9.2x, 10.0x, 10.1x and 10.2x

BACKGROUND

CVSS Base Metrics

=================

Reference, CVSS V3 Score/Vector, CVSS V2 Score/Vector

CVE-2017-5810

7.5 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

7.8 (AV:N/AC:L/Au:N/C:C/I:N/A:N)

CVE-2017-5811

7.5 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

7.8 (AV:N/AC:L/Au:N/C:C/I:N/A:N)

CVE-2017-5812

5.3 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N

5.0 (AV:N/AC:L/Au:N/C:P/I:N/A:N)

CVE-2017-5813

4.6 CVSS:3.0/AV:N/AC:H/PR:L/UI:R/S:U/C:L/I:L/A:L

6.0 (AV:N/AC:M/Au:S/C:P/I:P/A:P)

CVE-2017-5814

8.8 CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

9.0 (AV:N/AC:L/Au:S/C:C/I:C/A:C)

Information on CVSS is documented in

HPE Customer Notice HPSN-2008-002 here:

https://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c013454

99

Hewlett Packard Enterprise thanks the following for reporting security issues

to security-alert (at) hpe (dot) com [email concealed]:

* CVE-2017-5810 rgod working with Trend Micro’s Zero Day Initiative

* CVE-2017-5811 rgod working with Trend Micro’s Zero Day Initiative

* CVE-2017-5812 rgod working with Trend Micro’s Zero Day Initiative

* CVE-2017-5814 Christophe Schleypen of NATO NCIRC

RESOLUTION

HPE has made the following software updates and mitigation information

available to resolve the vulnerabilities in HPE Network Automation:

Customers on version 9.1x or 9.2x need to upgrade to a patched version of

10.0x, or 10.1x or 10.2x noted below

For 10.0x, first patch to 10.00.021, and then apply the patch 10.00.022:

*

<https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/f

acets

arch/document/LID/NA_00042>

* Please follow SPECIAL INSTALL INSTRUCTIONS section mentioned under

Installation Instructions

* In addition, follow the procedures described in the following sections in

the NA Hardening Guide available at:

<https://softwaresupport.hpe.com/km/KM02615679>

– Enable Secure Communication with Satellites

– Enable SSL Communications over RMI

For 10.10, customers should first upgrade to 10.11:

<https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/f

acets

arch/document/LID/NA_00030> and then apply the 10.11 patch below.

* For 10.11, apply the patch 10.11.03:

<https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/f

acets

arch/document/LID/NA_00044>

* Please follow SPECIAL INSTALL INSTRUCTIONS section mentioned under

Installation Instructions.

* In addition, follow the procedures described in the following sections in

the NA Hardening Guide available at:

<https://softwaresupport.hpe.com/km/KM01964007>

– Enable Secure Communication with Satellites

– Enable SSL Communications over RMI

For NA 10.20, customers should first upgrade to 10.21

<https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/f

acets

arch/document/LID/NA_00040> and then apply the 10.21 patch below:

* For 10.21, apply the patch 10.21.01:

<https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/f

acets

arch/document/LID/NA_00043>

* Please follow SPECIAL INSTALL INSTRUCTIONS section mentioned under

Installation Instructions

* In addition, follow the procedures described in the following sections in

the NA Hardening Guide (available at:

<https://softwaresupport.hpe.com/km/KM02501298>

– Enable Secure Communication with Satellites

– Enable SSL Communications over RMI

HISTORY

Version:1 (rev.1) – 4 May 2017 Initial release

Third Party Security Patches: Third party security patches that are to be

installed on systems running Hewlett Packard Enterprise (HPE) software

products should be applied in accordance with the customer’s patch management

policy.

Support: For issues about implementing the recommendations of this Security

Bulletin, contact normal HPE Services support channel. For other issues about

the content of this Security Bulletin, send e-mail to security-alert (at) hpe (dot) com. [email concealed]

Report: To report a potential security vulnerability for any HPE supported

product:

Web form: https://www.hpe.com/info/report-security-vulnerability

Email: security-alert (at) hpe (dot) com [email concealed]

Subscribe: To initiate a subscription to receive future HPE Security Bulletin

alerts via Email: http://www.hpe.com/support/Subscriber_Choice

Security Bulletin Archive: A list of recently released Security Bulletins is

available here: http://www.hpe.com/support/Security_Bulletin_Archive

Software Product Category: The Software Product Category is represented in

the title by the two characters following HPSB.

3C = 3COM

3P = 3rd Party Software

GN = HPE General Software

HF = HPE Hardware and Firmware

MU = Multi-Platform Software

NS = NonStop Servers

OV = OpenVMS

PV = ProCurve

ST = Storage Software

UX = HP-UX

Copyright 2016 Hewlett Packard Enterprise

Hewlett Packard Enterprise shall not be liable for technical or editorial

errors or omissions contained herein. The information provided is provided

“as is” without warranty of any kind. To the extent permitted by law, neither

HP or its affiliates, subcontractors or suppliers will be liable for

incidental,special or consequential damages including downtime cost; lost

profits; damages relating to the procurement of substitute products or

services; or damages for loss of data, or software restoration. The

information in this document is subject to change without notice. Hewlett

Packard Enterprise and the names of Hewlett Packard Enterprise products

referenced herein are trademarks of Hewlett Packard Enterprise in the United

States and other countries. Other product and company names mentioned herein

may be trademarks of their respective owners.

—–BEGIN PGP SIGNATURE—–

Version: GnuPG v1

iQEcBAEBCAAGBQJZC1TcAAoJELXhAxt7SZaib7UH/3e3+hBgB/7bpI0ta5DGxAJH

RvBpynUuc8DAP+fKTpWx4r6LZwUnXYlytjj/zaiX0tnekZdsCDs+fWiLimQ6BNzp

hY3oFcBPqpmbKtw3DmveR2k70Uq05dhhZ9ciNTBga8jvcUbKFxlB/41yzIQx6Kdp

kX/Sn3XQuNP8ylBaDL3ogcjUsfoiZNAEtO2XRDbJ+5MXo4Tr6t4ogstLUZT6M2T+

plrIomQzU2cAI7qVlNMRW1X4rRA0DP3SWINI5phEyPQEbYCPCeY5/pf55KlhGWuj

cXsEwyXXeBMASD9bswq32+HYSkc6qtYRaQFwuATtWWLY94ZctRkixKpMpzss5ls=

=YOyv

—–END PGP SIGNATURE—–

[ reply ]

Source: SecurityFocus Vulnerabilities @ May 5, 2017 at 05:35AM

0
Share